B52 - 21 and 23ft

Indmar Marine Heater Tube – Long | 6.2L | Part #597222 Maintain leak-free heater circuit connections on your Ford 6.2L with this genuine Indmar long heater tube. The companion piece to 597223 — correct OEM shape ensures perfect fitment first time with no modification required. Compatible with: Indmar Ford 6.2L marine engines fitted to Malibu, Moomba, Supra, and Tige boats. Contact us to verify fitment before ordering. Long or Short — which do I need? The 6.2L heater circuit uses two tubes — a short tube (597223) and a long tube (597222). One routes coolant to the heater and one returns it. If you are replacing one due to corrosion or damage it is strongly recommended to replace both at the same time — they wear at similar rates and replacing both together saves labour costs down the track.

Indmar Marine Fitting – 1/2" Male Brass x 1/2" Jiffy O-Ring Seal | Part #601048A Ensure a leak-free connection in your Indmar cooling or fluid system with this genuine Indmar 1/2" male brass fitting with Jiffy O-ring seal. Precision machined for correct OEM fitment — the O-ring seal design provides a positive leak-free connection without thread sealant or tape. Compatible with: Indmar marine engines and cooling systems fitted to Malibu, Moomba, Supra, and Tige boats.

Indmar Marine Raw Water Pump Bracket Kit – 5.7L | Part #495200 Ensure your raw water pump is correctly and securely mounted with this genuine Indmar raw water pump bracket kit for the 5.7L marine engine. The pump bracket is the structural foundation of your raw water cooling system — holding the pump in precise alignment with the drive belt and engine block. A worn, cracked, or incorrectly fitted bracket causes pump misalignment, accelerated belt wear, bearing failure, and ultimately cooling system breakdown on the water. Compatible with: Indmar 5.7L marine engines

Indmar Marine Thermostat Housing Gasket | Part #551004 A small part that does a critical job — this genuine Indmar thermostat housing gasket seals the thermostat housing to the engine block, preventing coolant leaks at one of the most heat-stressed joints in the cooling system. Always replace this gasket any time the thermostat housing is removed — never reuse an old gasket. Compatible with: Indmar marine engines

Indmar Marine Thermostat Kit – 5.7L | Part #491010 Service your 5.7L cooling system with confidence using this genuine Indmar thermostat kit — a complete kit containing everything needed for a full thermostat replacement in one part number. No hunting for individual gaskets or hardware — everything included, ready to fit. Compatible with: Indmar 5.7L marine engines fitted to Malibu, Moomba, Supra, and Tige boats. Contact us to verify fitment

Indmar Marine Thermostat Housing Gasket | Part #531058 Ensure a leak-free thermostat housing seal with this genuine Indmar thermostat housing gasket. A small but critical component — always replace this gasket any time the thermostat housing is removed. Never reuse an old gasket on reassembly.